Enable or disable windows startup programs

How enable or disable windows startup programs?

Sometimes you may feel that your computer is taking long time to boot. Usually it should take less than minute to boot your PC. This is depend on your hardware configuration. If you have latest processor and enough RAM definitely machine will be boot quickly otherwise it make take one or two minutes to complete the boot. But if there a abnormal latency you can imagine there can be issue with startup process. Because there can be a lot of auto start programs on you system.

There are several programs that start with the boot process of your PC or laptop. Before you install other third party software, there are few programs in the windows startup. You can check this just after the installation of your OS. You can simply open the Run dialog box and type msconfig and hit enter. Clicking on Startup tab you can find the auto start programs of your computer. After you install other Microsoft or non-Microsoft programs there can be additional startup programs in the startup programs list. Examine the startup program list, you can identify and troubleshot problems that prevent Windows from starting slowly .You can determine all startup programs and learn how to enable or disable them by follow the examples below.

how to find and change startup programs windows 7

1. Click on Windows key+R to open the Run dialog box. Type msconfig and click OK. Or you can simply type the word msconfig on the start menu search box in windows 7.
   
   
   
2. It will open windows system configuration tool for you.
   
   
3. On the general tab you can see there are three startup configuration modes. Normal startup mode is the windows default start up mode. By selecting this option all startup programs will be loaded at the boot time. Diagnostic startup mode is load basic windows services and drivers at the boot time. Selective startup mode is the way that you can choose what to start during the system boot and what not.
   
   
   
4. If you want to change the startup programs you have to click on startup tab. There you can see a list of programs that automatically load in to memory during the system startup. You can quickly enable or disable startup programs using provided check boxes.
   
   
   
5. Please be careful when you doing changes to these programs. First try to determine what are the un wanted programs and un-tick them. If you have installed a virus guard on your system it will show as a startup program. Please don't disable it. Otherwise you will be at a great security risk.
   
   
   
6. If you have install third party software such as Apple Quick Time Player, Orbit Download Manager, Nero burning ROM, Java Runtime, CyberLink You Cam, Google Talk, Media players, there can be lot of programs in the startup list. You have the choice to decide what should be load what should not.
   
   
   
7. After selecting programs that you want to load during the startup process, click OK. You have to restart your system to take the effect. You can continue with your works and do the restart later. If there ware large number of un wanted programs, You can gain better loading time than the past.
   
   
   
   
   

Configure the program loading method to prevent un-wanted startup directly.

1. Most of the programs that loaded automatically during the startup process, have configuration options that you can enable or disable the it. As an example I'll show you how to disable Orbit and utorrent downloaders during the boot.
2. Disable orbit on system startup.
   
   
   
3. Disable utorrent on system startup.
   
   
   

Tools that can be use to enable disable startup programs on windows XP or later

There are some third party software that you can use to configure the startup programs of your computer. Autoruns for Windows is a handy utility for startup management tool from sysinternals. You can download it for free of charge.

Just download an un zip the file. Double click on autoruns.exe or right click on it an click on Run as Administer. You can see a comprehensive list of programs filter by Boot Execute, Drivers, Winlogon, etc.

Another tool is CCleaner from www.piriform.com. It has a option to list all auto start programs and enable or disable them. Start CCleaner and click on tools icon. Then select startup tab. There you can see all startup programs on your PC. You can download the free edition of the program.

How to add a program to windows startup?

1. Click on start menu and type startup or expand all programs node and select startup folder. Right click on it and select open.
   
   
   
2. Now you have open startup folder of your PC. Right click on a free space and select new. on the the sub menu click on Shortcut.
   
   
   
3. Browse and select the program that you want to start on the startup. Click on next.
   
   
   
   
4. Type a name for the shortcut and click on finish.
   
   
   
5. Restart your computer to apply the changes. You can see the program you have selected is automatically starts when the system startup.
   

* You have to log as system administrator to perform theses tasks.
* Please note that you must restart your computer to take the effect of your changes.
* Don't disable your virus guard from the startup programs.
* Disabling some programs may result the slow startup of the related programs.
* Adding more programs to startup may badly affect your system performance.

Change partition or drive letter in windows7

How change the drive letter in windows 7?

In some cases you may want to change your drive letter to another. Using Windows Disk Management Utility tool you can assign, remove or change a drive letter in your computer. As a example you may need to change your pen drive letter M to F or D. Following example will give you a clear idea about how to perform that task. Note that you cannot change the drive letter which you have installed the Operating system (System Drive) through the Windows Disk Management Tool.

Also you can remove or hide partitions from my computer. So anyone can't see it through My Computer window. If you want to make that drive visible again in My Computer you can simply assign a drive letter. That's all. Be careful to close all opened files which are store in the drive that you need to change the drive letter. Sometimes you may have installed some programs on the drive that you need to change the letter. After changing letter of that partition, that program fail to load or gives you some error messages like "the program fail to load the file of file does not found." You can change back the drive letter and access the program again.

Step by step how to change the drive letter in windows 7

1. Right click on my computer and click on Manage. This will open Computer Management window for you.
   
2. Under the left navigation panel (computer management(Local) you can see the storage section. Expand it and click on Disk Management. This will open Disk Management Utility for you.
   
   
   
3. You can see all disk drive in your computer including Hard Disks,Pen Drives,CD-DVD drives etc. Select the drive that you want to change the drive letter and right click on it. Click on Change Drive Letter and Paths.
   
4. After clicking on change drive letter and paths it will open a small dialog box. Then click on Change button. Another dialog box will appear and you can select a letter from the drop down list. Note that it will list only available drive letter of the system. Pick a desired letter and click ok.
   
5. You will be prompted to confirm the task. It informs that you Some programs that rely on drive letters might not run correctly. Before you confirm make sure no such program using this drive letter. Then click on ok.
   
6. After changing the drive letter you can see the disk management windows shows the new drive letter and you can see the drive on My Computer.
   

How to assign drive letter to a partition in windows 7

1. Right click on my computer and click on Manage.
2. Select the partition that you need to assign drive letter. Right click on it and click on Change Drive Letter and Paths.
   
   
   
3. A dialog box will appear and click on add button.
   
4. Select a letter and click on ok button.
   
5. You can see the assigned drive on my computer and disk management tool.
   

How to remove the drive letter of a partition in windows 7

1. Right click on the drive that you need to remove the letter. Click on Change Drive Letter and Paths.
2. Click on remove button. A confirmation dialog will appear Make sure the drive it not in use and no programs rely on the drive. Click on ok.
   
   
   
   
   
   
3. Drive will hide from my computer and you are no longer able to open it. But you can still see the partition through Disk Management Utility.
   
   
   
   
   
   

Using above process, you can change the letter of your CD-Drive, DVD-Drive, Pen Drive Or SD card.

* You have to log as administrator to perform this task.
* You can't change the system drive letter( drive which contains the Operating System) using this process.
* Changing the drive letter does not affect the data on that drive.
* Removing drive from my computer does not affect the data on that partition.
* Make sure no other program using the drive before remove or change the letter.